weekly report

Smart’O Clock team

Hello everybody, this week we made the laboratory n°3. In the first time we needed to finished the lab n°2 because we don’t have any time last week to finish them. So after that we took care to do the lab n°3, for this we had to rotate a small motor. In one exercise we needed to put a push button to stop and start the motor and a switch button to reverse the direction of rotation. But we had a problem, in fact we decided, on the beginning, to put the switch button to reverse the direction of rotation. We wiring all cables but nothing work… In fact the resistance that we had put was not big enough and the motor can’t running. So we install a bigger resistance and that work.

The second problem was that, when we switching the button the motor stop instead to reverse of direction. So we look in the wiring, but it was okay. Then we watch the program, and it was also okay because when we putting a delay on the program we saw that the program gone on the else of the function. So at the end of the lab we decided to try again last week. Because now, we are sure that it’s not the wiring and we just want to look at the program.

I hope that you don’t have the same problem as our and it worked perfectly in your case.

See you to next week!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s